Tanks- Alloy
4- Used approximately 50 gallon stainless steel vertical mix tank. 24" diameter X 24" high straight side. Flat hinged top, cone bottom. 3" top fill, 1" center bottom drain. 1.5HP homogenizer agitator. Mounted on legs giving 18" clearance to floor ( # 368-6 )
--------------------------------------------------------------------------------------------------------------------
2- USED APPROX 375 GALLONS ( 1450 LITERS ) VERTICAL STAINLESS STEEL TANKS. POLISHED INTERNALS. 36 IN DIA X 84 IN HIGH STRAIGHT SIDE, FLAT BOTTOM, SHALLOW CONE TOP. MOUNTED ON 3 LEGS FOR APPROX 24 IN CLEARANCE FROM OUTLET TO FLOOR. # 337-1
( photos # 337-1 )
--------------------------------------------------------------------------------------------------------------------
1- USED APPROX 500 GALLONS VERTICAL STAINLESS STEEL TANK. 54 IN DIA X 60 IN HIGH STRAIGHT SIDE. FLAT CLOSED TOP, FLAT BOTTOM SLOPES TO ONE SIDE. ON LEGS FOR APPROX 16 IN CLEARANCE. TOP- 1- 20 IN MANWAY, 1- 2 IN FITTING. 1- 2 IN OUTLET. ( # 362-04 )
--------------------------------------------------------------------------------------------------------------------
2- Used approx 750 gallon vertical T-316 L stainless steel pressure/vacuum tank. 60 in diameter x 56 in high straight side plus ASME flanged and dished heads. ASME Code stamped 30 psi/full vacuum at 300 deg F. (#388-1, #388-2)
--------------------------------------------------------------------------------------------------------------------
1- USED APPROX 800 GALLON VERTICAL STAINLESS STEEL TANK. 60 IN DIA X 72 IN HGH. OPEN TOP, FLAT SLOPING BOTTOM WITH 1 - 2 IN TRI-CLOVER TYPE OUTLET. ON 5 LEGS WITH APPROX 12 IN CLEARANCE TO FLOOR.(#362-05)
--------------------------------------------------------------------------------------------------------------------
1- Hastelloy B vertical tank, 1,000 gallons, ASME code 75 psi/full vacuum internal, bottom head jacketed for 150 psi..internal coil rated 150 psi....last used as part of a distillation reaction. Built 1996. ( # 369-8 )
--------------------------------------------------------------------------------------------------------------------
2-USED APPROX 1,000 GALLON VERTICAL STAINLESS STEEL JACKETED KETTLES. WITH HOCKMEYER 50 HP DISPERSER. ( # 360-05 )
--------------------------------------------------------------------------------------------------------------------
1- Used approx 1,000 gallon vertical T-316 L stainless steel pressure/vacuum tamk. 54 in diameter x 72 in high straight side plus ASME flanged and dished heads. ASME Code stamped 30 psi/full vacuum at 300 deg F. (#388-1)
--------------------------------------------------------------------------------------------------------------------
1- USED APPROX 1,750 GALLON VERTICAL STAINLESS STEEL JACKETED MIX TANK. 6 FT 6 IN DIA X 6 FT 10 IN HIGH STRAIGHT SIDE, PLUS DISHED BOTTOM HEAD. JACKET ON 4 FT OF SHELL AND BOTTOM HEAD, ASME 40 PSI. TOP MOUNTED 15 HP MOTOR, RIGHT ANGLE REDUCER, STAINLESS STEEL SHAFT ( MISSING AGITATOR BLADES ). 1- 4 IN CENTER BOTTOM OUTLET. FLAT HINGED COVER. ( # 360-06 )
--------------------------------------------------------------------------------------------------------------------
1- USED APPROX 2,000 GALLON VERTICAL STAINLESS STEEL TANK. 84 IN DIA X 84 IN HIGH STRAIGHT SIDE, CONE TOP, CONE BOTTOM. ON LEGS WITH APPROX 12 IN CLEARANCE TO FLOOR. TOP HAS 1- 18 IN MANWAY, 2 - 2 IN FITTINGS. CENTER BOTTOM OUTLET IS 2 IN.( 362-07 )
--------------------------------------------------------------------------------------------------------------------
1- USED VERTICAL APPROX 3,200 GALLON STAINLESS STEEL HEATED MIX TANK. 8 FT DIAMETER X 8 FT HIGH STRAIGHT SIDE, PLUS DISHED HEADS. ON 4- STEEL I-BEAM LEGS WITH FLOOR PADS. INTERNAL HAS APPROX 9 TURNS OF 3 INCH DIA SS PIPE COIL ON APPROX 6 FT PITCH DIAMETER. TOP ENTRY AGITATOR WITH MECHANICAL SEAL, WITH MOTOR AND DRIVE. 2- APPROX 36 IN DIAMETER SS TURBINE BLADES ON SHAFT AND SS BAFFLES. REPORTED T-316 STAINLESS STEEL.
--------------------------------------------------------------------------------------------------------------------
1- USED APPROX 4,000 GALLONS HORIZONTAL T-304 STAINLESS STEEL TANK. APPROX 6 FT DIAMETER X 20 FT LONG STRAIGHT SIDE, PLUS DISHED HEADS. WITH 2 STEEL SADDLE SUPPORTS. BOTTOM 1/3 OF SHELL IS COVERED WITH PLATECOIL TYPE REMOVABLE HEAT TRANSFER PLATES FOR APPROX 15 FT OF SHELL LENGTH. FITTINGS : 1- 3 IN FLANGED OUTLET IN BOTTOM AT ONE END OF SHELL, TOP HAS 1- APPROX 18 IN FLANGE, 1- 3 IN FLG, 2- 2 IN FLGS, 2- 2 IN STUB ENDS. SHELL AND HEADS APPROX 1/4 IN THICK. (382-2)
